DOOR HANDLE CUP PROTECTION COVERS to suit 2020-2024 Isuzu D-Max

• Compatible with 2020-2024 Isuzu D-Max

Introducing Our Door Cup Protection Sets for Your 2020-2024 ISUZU D-MAX!

Don't wait for those inevitable scratches to mar the beauty of your new My21 D-max. Our door cup protection sets are expertly crafted to fit the contours of your vehicle, providing both style and defense against wear and tear.

Here's why our door cup protection sets are a must-have:

1. Tailored Fit for Your My21 D-max: Designed specifically for the new shape of the 2020-2024 ISUZU D-MAX, our door cup protection sets offer a precise fit that seamlessly integrates with your vehicle's aesthetics, ensuring maximum coverage and protection.

2. Stylish and Protective: Say goodbye to unsightly scratches and dings above and behind your door handle. Our sets are molded to perfection, providing a sleek and stylish barrier against everyday damage, preserving the pristine appearance of your vehicle.

3. Easy Installation: With a quick and hassle-free DIY installation process, you'll have your door cup protection sets in place in no time. Equipped with a reliable 3M adhesive strip, simply peel and stick for a secure and long-lasting bond. Plus, the adhesive tape comes pre-applied from the manufacturer for your convenience.

4. Customizable Adhesion: We understand that adhesive strength may vary based on personal preference and environmental factors. That's why we provide the flexibility for you to assess and adjust the adhesive tack before installation. Add more adhesive or replace it with a tape of your choice for added peace of mind.

5. Compatibility and Assurance: While our door cup protection sets are compatible with most applications, please note that they are not suitable for use with Rhino Hide or other aftermarket accessories that may come into contact with the application areas. Additionally, please ensure compatibility by checking product photos before purchase, as we do not offer refunds for incorrect product choices.

Protect your investment and enhance the appearance of your ISUZU D-MAX with our door cup protection sets. Invest in quality, style, and peace of mind today!

• Door Bowl Cup Protector – Installation Guide
  
  Compatible with: Isuzu D-MAX, Mazda BT-50, Isuzu MU-X
  
  Now is the Time to wash your vehicle !!- Further reference at the end.
  
  
• Step 1: Inspect & Identify Parts Carefully inspect all parts received. Make sure you have the correct quantity and shapes for your vehicle (front/rear, left/right). Some designs are position-specific — refer to product photos and part shapes. If you're unsure, please contact us before continuing.
  
  
• Step 2: Test Fit & Familiarize Lock your vehicle to allow the handle to be pulled out without opening the door. Begin with test fitting each protector: Pull the handle out. Slide the protector in from the top and front of the door bowl area. Once the front is positioned over the handle, lower the rear into place. Use body lines and the handle to align. Apply light pressure to check fitment. Review our product photos to confirm correct orientation. If you have concerns, pause and contact us before attempting to fit.
  
  
• Step 3: Repeat Test Fit for All Doors

  Repeat the above test fit process for every door bowl.

  This ensures all pieces are correct and avoids fitting errors.

  Yes, it takes a little extra time — but it makes the final installation smooth and hassle-free.

  
  Step 4: Clean the Surface Thoroughly

  This step is critical for proper adhesion.

  Mix 50/50 water and isopropyl alcohol.

  Wipe each door bowl area thoroughly to remove dirt, wax, or coatings (including ceramic paint protection).

  Use a clean microfiber cloth to dry the area fully.

  Do not skip this step — poor preparation will lead to adhesive failure!!

  
  Step 5: Prepare Adhesive Tabs

  On the back of each protector, lift a small portion of the red backing tape on each adhesive strip.

  Fold these tabs forward — this makes it easier to pull off later without sticking prematurely.

  
  Step 6: Final Fitment

  Carefully position the protector into place, keeping it slightly away from the surface.

  Once you're confident it's correctly aligned, lightly press it into place.

  Now remove the red tape backing using the folded tabs from earlier.

  Once all backing is removed, press firmly along the adhesive edges and in the center using a microfiber cloth.

  Repeat this step for all doors, then go back and press again on the first one installed to ensure maximum bond.

  
  FINAL NOTE:

  If your car wasn’t washed before installation, do not wash it now.

  Avoid water or car washes for at least 24 hours to allow full adhesive bonding.

  We recommend washing the vehicle before starting the installation process next time.