MAZDA BT-50 2021+ DOOR HANDLE CUP PROTECTION COVERS

Enhance Your Mazda BT-50's Style and Protection with Our Door Cup Protection Sets!

Don't wait until scratches mar the appearance of your Mazda BT-50 – safeguard it with our custom-designed door cup protection sets. Here's why they're the perfect addition to your vehicle:

1. Tailored Fit: Precision-molded to perfectly suit your Mazda BT-50's door cups, our protection sets offer seamless integration and superior coverage. Say goodbye to unsightly scratches and hello to stylish protection that complements your vehicle's design.

2. Stylish Design: Elevate the look of your Mazda BT-50 with our door cup covers, featuring sleek black construction adorned with BT-50 branding. The subtle yet eye-catching design adds a touch of sophistication to your vehicle's exterior.

3. Easy Installation: Enjoy hassle-free installation with our DIY-friendly design. Simply remove the backing tape from the adhesive strip, test fit the covers into position, then firmly press them into place. No drilling or complex tools required – just a few simple steps for instant protection.

4. Durable Adhesive: Our door cup protection sets are equipped with high-quality 3M adhesive strips, ensuring a secure and long-lasting bond. For optimal bonding, avoid exposure to moisture and contamination for 12-48 hours after installation.

5. Customer Satisfaction Guarantee: While we strive to provide accurate product descriptions and images, we recommend verifying compatibility with your vehicle before purchase. As we prioritize customer satisfaction, we regret that we're unable to offer refunds for incorrect product choices.

Protect your Mazda BT-50 in style with our door cup protection sets. Experience peace of mind knowing that your vehicle is shielded from scratches and damage, all while enhancing its appearance. Upgrade your ride today!

• Door Bowl Cup Protector – Installation Guide
  
  Compatible with: Isuzu D-MAX, Mazda BT-50, Isuzu MU-X
  
  Now is the Time to wash your vehicle !!- Further reference at the end.
  
  
• Step 1: Inspect & Identify Parts Carefully inspect all parts received. Make sure you have the correct quantity and shapes for your vehicle (front/rear, left/right). Some designs are position-specific — refer to product photos and part shapes. If you're unsure, please contact us before continuing.
  
  
• Step 2: Test Fit & Familiarize Lock your vehicle to allow the handle to be pulled out without opening the door. Begin with test fitting each protector: Pull the handle out. Slide the protector in from the top and front of the door bowl area. Once the front is positioned over the handle, lower the rear into place. Use body lines and the handle to align. Apply light pressure to check fitment. Review our product photos to confirm correct orientation. If you have concerns, pause and contact us before attempting to fit.
  
  
• Step 3: Repeat Test Fit for All Doors

  Repeat the above test fit process for every door bowl.

  This ensures all pieces are correct and avoids fitting errors.

  Yes, it takes a little extra time — but it makes the final installation smooth and hassle-free.

  
  Step 4: Clean the Surface Thoroughly

  This step is critical for proper adhesion.

  Mix 50/50 water and isopropyl alcohol.

  Wipe each door bowl area thoroughly to remove dirt, wax, or coatings (including ceramic paint protection).

  Use a clean microfiber cloth to dry the area fully.

  Do not skip this step — poor preparation will lead to adhesive failure!!

  
  Step 5: Prepare Adhesive Tabs

  On the back of each protector, lift a small portion of the red backing tape on each adhesive strip.

  Fold these tabs forward — this makes it easier to pull off later without sticking prematurely.

  
  Step 6: Final Fitment

  Carefully position the protector into place, keeping it slightly away from the surface.

  Once you're confident it's correctly aligned, lightly press it into place.

  Now remove the red tape backing using the folded tabs from earlier.

  Once all backing is removed, press firmly along the adhesive edges and in the center using a microfiber cloth.

  Repeat this step for all doors, then go back and press again on the first one installed to ensure maximum bond.

  
  FINAL NOTE:

  If your car wasn’t washed before installation, do not wash it now.

  Avoid water or car washes for at least 24 hours to allow full adhesive bonding.

  We recommend washing the vehicle before starting the installation process next time.